User Manual Q&AAnswer
Jan 29, 2025 - 02:51 AM
To pair the SHOKZ CL101A Loop100 USB-A Bluetooth Wireless Adapter with your PC, please follow these steps:
1. Start with OpenComm turned off. Make sure the adapter is not connected to any device.
2. Press and hold the Volume+ button on the adapter until the LED Indicator starts flashing red and blue. This indicates that the adapter is in pairing mode.
3. Plug the USB adapter into a USB port on your PC. The LED on the adapter will start flashing blue rapidly, indicating that it is searching for a device to pair with.
4. On your PC, open the Bluetooth settings. This can usually be found in the system tray or in the Control Panel.
5. In the Bluetooth settings, make sure Bluetooth is turned on and set to discoverable mode.
6. Your PC should now detect the SHOKZ CL101A Loop100 USB-A Bluetooth Wireless Adapter. It may appear as "SHOKZ CL101A" or a similar name in the list of available devices.
7. Select the adapter from the list of available devices on your PC and click on the "Pair" or "Connect" button.
8. The connection will be established when Audrey, the voice assistant, says "Connected" or emits a beep. Additionally, the LED on the USB adapter will turn solid blue, indicating a successful pairing.
Please note that the exact steps may vary slightly depending on your PC's operating system and Bluetooth settings. If you encounter any issues during the pairing process, refer to the user guide or contact SHOKZ customer support for further assistance.
Add New Comment