User Manual Q&AAnswer
Jan 29, 2025 - 02:49 AM
To connect your Panasonic PT-FW300U Multimedia Projector to your computer, follow these steps:
1. Ensure that both the projector and the computer are turned off.
2. Locate the computer's video output port. This is usually a VGA or HDMI port on the back or side of the computer.
3. Connect one end of the appropriate video cable (VGA or HDMI) to the computer's video output port.
4. Locate the corresponding video input port on the projector. This is usually labeled as "Computer In" or "RGB In."
5. Connect the other end of the video cable to the projector's video input port.
6. If you are using a VGA cable, you will also need to connect the audio cable from the computer's audio output port to the projector's audio input port.
7. Once all the connections are made, turn on the projector and the computer.
8. Use the projector's remote control to select the appropriate input source. Press the "Input" or "Source" button on the remote until the computer input is selected.
9. The projector should now display the computer's screen. Adjust the focus and other settings as needed.
For more detailed instructions and diagrams, please refer to the user manual of the Panasonic PT-FW300U Multimedia Projector.
Add New Comment