User Manual Q&AAnswer
Jan 29, 2025 - 02:31 AM
To set the temperature on the Labnet I5110A Mini Laboratory Incubator, follow these steps:
1. Push the Power switch to the ON position. The switch should illuminate.
2. Set the temperature controller to 10.
3. When the thermometer reaches the desired operating temperature, turn the control down until the heating light turns off.
4. Wait for the temperature to stabilize.
5. Make small adjustments up and down as required until the desired operating temperature is obtained. Allow the unit to stabilize between each adjustment.
6. Temperature stability is obtained when the HEATING lamp is going on and off automatically and the temperature remains constant.
Please note that for maximum accuracy, insert the thermometer to a point where the thermometer immersion line is just inside the incubator chamber.
For further assistance or troubleshooting, you can contact Corning Customer Service at 800.492.1110 or 978.442.2200.
Add New Comment