How do I control colors & patterns Oracle Lighting 3990-332 Dodge Challenger Mount Halo Kit using smartphone app? (ORACLE LIGHTING 3990-332 Surface Mount Halo Kit User Guide)

Answer

manuals.plus

Jan 29, 2025 - 02:30 AM

To control the colors and patterns of the Oracle Lighting 3990-332 Dodge Challenger Surface Mount Halo Kit, you will need to use the smartphone app. Here is a step-by-step guide on how to do it:

1. Download and install the Smartphane App on your smartphone.
2. Open the app and make sure your smartphone's Location Services are turned on. This is necessary for the app to connect to the SP105E device.
3. In the app, select the SP105E Device from the available devices list.
4. Connect your smartphone to the Bluetooth device through the app, not through the phone's settings menu.
5. Once connected, you will have control over the colors and patterns of the halo kit through the app.
6. Use the app's interface to select the desired color and pattern options for your Oracle Lighting halo kit.

Please note that the colors and patterns available are for show use only and are not intended for on-road use. Make sure to comply with local laws and regulations regarding the use of aftermarket lighting products.

For further assistance, you can refer to the installation video provided at vimeo.com/282690663, which will guide you through the installation process of the Oracle Lighting 3990-332 Dodge Challenger Surface Mount Halo Kit.

Regarding the wiring of the halo kit, refer to the wiring diagram provided in the user guide:
- Connect the yellow wire to the turn signal.
- Connect the white wire to an ignition source (+).
- Use the fuse holder and insert a 10A fuse.
- Connect the red wire to the battery.
- Connect the black wire to the ground.
- Connect the 6 output cables to the headlights.

If you have any further questions or need additional assistance, please consult the user guide or contact Oracle Lighting customer support for further assistance.