User Manual Q&AAnswer
Jan 29, 2025 - 02:26 AM
To install the THULE 145318 Evo Clamp Roof Bar Fitting Kit on your PEUGEOT 308 (P5) 5-dr Hatchback without a glass roof, please follow the instructions below:
1. Start by checking that all the required components are included in the kit. Refer to the parts list in the instruction manual to ensure you have everything needed.
2. Before installation, make sure the vehicle's roof is clean and free from any dirt or debris. This will ensure a secure and stable fit.
3. Open the vehicle doors and locate the mounting points on the roof. These are usually indicated by small covers or markings.
4. Remove the covers or markings from the mounting points. This may require using a flathead screwdriver or a similar tool.
5. Take the Evo Clamp foot assembly and attach it to the mounting points on the roof. Ensure that the foot assembly is aligned properly and securely fastened.
6. Repeat the process for the remaining foot assemblies, making sure they are evenly spaced and aligned with the vehicle's roof.
7. Once all the foot assemblies are attached, place the Evo WingBar onto the foot assemblies. Align the WingBar with the foot assemblies and slide it into place.
8. Use the included torque tool to tighten the clamps on each foot assembly. Follow the recommended torque specifications provided in the instruction manual to ensure a proper fit.
9. After tightening the clamps, double-check that all the components are securely fastened and properly aligned.
10. Finally, give the roof bars a gentle shake to ensure they are stable and secure. If there is any movement or instability, recheck the installation steps and make any necessary adjustments.
Please note that this is a general overview of the installation process. For detailed and specific instructions, it is highly recommended to refer to the THULE 145318 Evo Clamp Roof Bar Fitting Kit Instruction Manual provided with the product.
Add New Comment