How do I turn on and use the Ningbo Electric Winch Wireless Controller? (ningbo Electric Winch Wireless Controller Instruction Guide)

Answer

manuals.plus

Jan 29, 2025 - 02:16 AM


To turn on the Ningbo Electric Winch Wireless Controller, press and hold the "ON/OFF" button for more than 3 seconds. The LED indicator will light up, indicating that the remote control is powered on. Once the remote control is powered on, you can use the "Extend" or "Retract" buttons to control the winch.

To extend the cable, press the "Extend" button. This will trigger the high-frequency FSK modulation unit to transmit the address code and key value. The high-frequency signal will be emitted by the antenna, causing the winch to extend the cable.

To retract the cable, press the "Retract" button. This will also trigger the high-frequency FSK modulation unit to transmit the address code and key value, causing the winch to retract the cable.

If there is no key operation within 50 seconds, the remote control will automatically shut down. To turn off the remote control manually, press and hold the "ON/OFF" button for more than 3 seconds. The LED indicator will turn off, indicating that the remote control is turned off.

Please note that before using the wireless controller, you need to disconnect the power to the winch and follow the installation instructions provided in the manual. It is important to read the winch manual before use and ensure that the control box is disconnected from the winch before any service or after every use to prevent accidental operation.