User Manual Q&AAnswer
Jan 29, 2025 - 01:30 AM
To connect your speakers to the Denon HEOS AMP Wireless Amplifier, follow these steps:
1. Ensure that the amplifier is powered off and disconnected from the power source.
2. Identify the speaker outputs on the back panel of the amplifier. These are labeled as "Speaker A" and "Speaker B."
3. For each speaker, strip a small portion of the insulation from the speaker wire.
4. Insert the exposed wire into the corresponding speaker output terminal. The positive (+) terminal is usually indicated by a red color or a "+" symbol, while the negative (-) terminal is usually indicated by a black color or a "-" symbol.
5. Tighten the speaker output terminals securely to ensure a proper connection.
6. Repeat the above steps for each speaker you want to connect.
7. Once all the speakers are connected, double-check the wiring to ensure that the positive and negative terminals are correctly matched.
8. Now, you can power on the Denon HEOS AMP Wireless Amplifier and start enjoying your audio through the connected speakers.
For more detailed instructions and illustrations, please refer to the user manual provided with the Denon HEOS AMP Wireless Amplifier.
Add New Comment