User Manual Q&AAnswer
Jan 29, 2025 - 01:18 AM
To adjust the height of the handles on the Vita Curis Flex Pro Rollator, follow these steps:
1. Locate the silver locking pins on both sides of the rollator frame, near the handles.
2. Push in the locking pins to release them from the frame.
3. Pull up or push down the handlebar to the desired height.
4. Release the locking pins to secure the handlebar in place. You should hear a click when the pins snap into the new position.
5. Repeat the process on the other side to ensure both handles are adjusted to the same height.
Please note that there are eight positions available for adjusting the handle height. Make sure the locking pins are fully engaged to ensure stability and safety while using the rollator.
For more detailed instructions and illustrations, please refer to the "Operation Instruction" section of the Vita Curis Flex Pro Rollator user manual.
Add New Comment