User Manual Q&AAnswer
Jan 29, 2025 - 01:02 AM
To install the Brilliant 22082-06 Celebrate Festoon 10M LED String Lights, please follow these steps:
1. Ensure that the wall power plug is switched off before starting the installation.
2. This unit is designed to be connected to a suitable AC to DC transformer 24V DC power supply. Only model numbers 22082 and 22083 come with the power supply included in the kit.
3. The Celebrate Festoon LED Light Kit is designed to be hung up. The wire length between each light is 1m.
4. The power supply is not weatherproof and should be installed indoors. Do not cut the wire.
5. Make sure that the power point is within 5m distance from your desired installation location.
6. Hang the first light up and then hang the rest of the lights within 1 meter apart from each other. Ensure that the end of the cable has the protection cover screwed tight to maintain the IP rating.
7. For extension, remove the protection cover from the first set of lights and connect the extension light set. Ensure that the end of the extended light set has the protection cover screwed tight to maintain the IP rating.
8. Plug in the power supply plug into a power outlet and turn the switch on.
Please refer to the instruction manual for further details and safety precautions.
Add New Comment