User Manual Q&AAnswer
Jan 29, 2025 - 12:58 AM
To connect the ENSTO LU335DDL Lumo Universal Luminaire, follow these steps:
1. Cut off the mains power before starting the installation.
2. Ensure that the installation is done by a qualified electrician.
3. Refer to the cable connection section in the instruction manual for detailed instructions on how to connect the luminaire.
4. Make sure to separate the control circuit from the mains voltage by using basic insulation.
5. Use only starters, light sources, and wattage as marked on the luminaire.
6. If the light source needs to be replaced, it should only be done by the manufacturer, their service agent, or a qualified person.
7. Follow local recycling guidelines when disposing of the luminaire at the end of its life cycle.
For more specific instructions and diagrams, please refer to the ENSTO LU335DDL Lumo Universal Luminaire Instruction Manual.
Add New Comment