User Manual Q&AAnswer
Jan 29, 2025 - 12:51 AM
To install the Shada 300817 40W Work Light for Power Tool Batteries Adapter, please follow these steps:
1. Ensure that you have fully read and understood the instructions in the provided manual before starting the installation.
2. Make sure to disconnect the product from the power source before beginning the installation.
3. Refer to the installation/wire diagram provided in the manual (if applicable) to understand the correct wiring connections.
4. Carefully connect the adapter to the power tool battery, ensuring a secure and proper connection.
5. Once the adapter is connected to the power tool battery, connect the work light to the adapter.
6. Ensure that all connections are secure and properly tightened.
7. Before using the product, make sure it is sufficiently ventilated to prevent overheating.
8. If any problems occur during installation or usage, disconnect the product from the power source and seek assistance.
Please note that if a non-standard power installation is required, it is recommended to have it performed by a qualified technician to reduce the risk of electric shock.
For further assistance or any additional questions, you can visit the support page at www.sheda.nl/nl/contact.
Add New Comment