User Manual Q&AAnswer
Jan 29, 2025 - 12:49 AM
To control and read the status of the ZPE-BCON-U05 Alarm-Free Signal Beacon, you can use CLI, Web, SNMP, or Restful APIs. Here is a step-by-step guide on how to set up and use the beacon:
1. Connect the beacon to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles, Services Routers, or USB hubs connected to Nodegrid hardware.
2. Make sure that your Nodegrid OS version meets the minimum requirements of the sensor. If not, upgrade your Nodegrid OS to at least version 5.4.1.
3. For more detailed information on the installation and setup process, please refer to the "Sensor Quick Install Guide" section of the user manual. You can find the user manual at the following link: [https://www.zpesystems.com/user-manuals/](https://www.zpesystems.com/user-manuals/)
By following these steps, you will be able to control and read the status of the ZPE-BCON-U05 Alarm-Free Signal Beacon using the available methods mentioned above.
Add New Comment