Answer

Jan 28, 2025 - 11:59 PM
To install the Centralite 3328-C Micro Motion Sensor, follow these steps:
1. Choose the desired location: Decide where you want to mount the sensor. It can be placed on a wall, in a corner, or on a counter or table.
2. Prepare the mounting plate: Use the included adhesive strips to attach the mounting plate to the desired location.
3. Pull the tab: Remove the small plastic tab from the bottom of the sensor. This will initiate the joining process.
4. Join the ZigBee network: Make sure your ZigBee network is enabled for joining using your controller or hub's interface.
5. Finish joining (optional): Some hubs or controllers may require additional steps, such as naming or categorizing the device. Follow the instructions provided by your specific hub or controller.
Once the sensor is successfully joined to the ZigBee network, it is ready to use.
For more detailed instructions, refer to the "Getting Started" section of the Centralite 3328-C Micro Motion Sensor User Guide
Add New Comment