User Manual Q&AAnswer
Jan 28, 2025 - 11:55 PM
To install the COOAU D60 Mirror Dual Night Vision Dash Cam in your vehicle, please follow the steps outlined in the user manual. Here is a complete guide on how to install the dash cam:
1. Start by locating a suitable spot on your vehicle's windshield where you want to mount the dash cam. It is recommended to choose a spot near the rearview mirror for optimal visibility.
2. Clean the chosen spot on the windshield thoroughly to ensure proper adhesion of the suction cup mount.
3. Attach the suction cup mount to the windshield by pressing it firmly against the glass and flipping the lever to create suction.
4. Take the dash cam and slide it onto the mount until it clicks into place securely.
5. Adjust the angle of the dash cam by rotating it on the mount until you achieve the desired viewing position.
6. Once the dash cam is mounted, connect the power cable to the dash cam's power port. The other end of the cable should be connected to your vehicle's cigarette lighter socket or a USB port.
7. Make sure the dash cam is receiving power by checking if the device turns on. The screen should display the camera feed.
8. Use the included cable clips to secure the power cable along the windshield and vehicle interior to keep it tidy and prevent it from obstructing your view.
9. Finally, adjust the settings on the dash cam according to your preferences, such as video resolution, loop recording, and motion detection, as described in the user manual.
Please note that these instructions are a general guide, and it is essential to refer to the specific instructions provided in the COOAU D60 Mirror Dual Night Vision Dash Cam user manual for accurate installation steps and any additional information.
Add New Comment