Answer
Jan 28, 2025 - 11:51 PM
To connect your Remo+ DCM2MG Over-The-Door Smart Security Camera to your Wi-Fi network, please follow these steps:
1. Make sure your mobile device is connected to your home's 2.4GHz Wi-Fi network (5GHz is not supported).
2. Download and launch the Remo+ app on your mobile device.
3. Press "Sign Up" at the bottom of the login page to create an account. Enter your email and create a password, then press "Sign Up".
4. After signing up, log in to the Remo+ app.
5. Press the "+" button on the home screen to add your device and select your time zone.
6. Switch to your phone's Wi-Fi settings, but keep the Remo+ app open. Connect to the network "DoorCam2_xxxxxx". If the network does not appear, press the status button on the back of your device and wait for the lights to flash up and down.
7. Once connected to the "DoorCam2_xxxxxx" network, switch back to the Remo+ app and press "Continue".
8. Select your home Wi-Fi network from the list, enter the password, and press "DONE". The app will then complete the registration process, which may take up to 3 minutes.
After completing these steps, your Remo+ DCM2MG Over-The-Door Smart Security Camera should be successfully connected to your Wi-Fi network. You can now access and control the camera through the Remo+ app on your mobile device.
Add New Comment