User Manual Q&AAnswer
Jan 28, 2025 - 11:48 PM
To install the LED s light 1000663 Wall Luminaire, please follow these steps:
1. Ensure that you have read and understood the instructions provided in the manual before starting the installation process.
2. Before connecting the luminaire to the power source, refer to the installation/wire diagram (if applicable) provided in the manual. Make sure to follow the diagram accurately to avoid any electrical issues.
3. Keep the manual for future reference and only use the product as described in the manual. Any other use of the product may result in damage or injury.
4. If any problems occur during installation or usage, disconnect the product from the power source immediately.
5. Handle the luminaire with care, avoiding dropping or bumping it. If any part of the product is damaged or defective, replace it immediately.
6. If a non-standard power installation is required, it is recommended to have a qualified technician perform the installation to reduce the risk of electric shock.
7. Ensure that the product is adequately ventilated during use. Do not cover the luminaire during usage, as it can generate heat and cause damage.
8. LED lights can be extremely bright and may cause serious eye damage, so avoid staring at the light directly.
9. Check if the product is specifically designed for indoor and/or outdoor use. This information can be found on the product/parts or in the manual.
10. Keep the product out of reach of children and animals.
For further assistance, comments, or suggestions, you can visit www.shada.nl/nl/contact for support.
Add New Comment