User Manual Q&AAnswer
Jan 28, 2025 - 11:41 PM
To connect your Epson PowerLite 62C LCD Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the computer video cable that came with your projector. It should have a blue connector on one end and a connector that matches the video port on your computer on the other end.
3. Connect the blue connector of the computer video cable to the Computer/Component Video port on the back of the projector.
4. Connect the other end of the computer video cable to the video port on your computer. This port is usually labeled as "VGA," "RGB," or "D-Sub."
5. Once the cable is securely connected, turn on your computer and projector.
6. On your computer, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display Settings" or a similar option.
7. In the display settings, select the option to extend or duplicate the display to the projector. This will vary depending on your operating system.
8. Adjust the projector's focus and zoom if necessary to ensure a clear image.
For more detailed instructions and troubleshooting tips, please refer to the Epson PowerLite 62C LCD Projector User's Guide provided in the link above.
Add New Comment