User Manual Q&AAnswer
Jan 28, 2025 - 11:38 PM
To connect your ViewSonic PJ766D Multimedia DLP Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., duplicate, extend, or projector only).
7. Adjust the focus and zoom on the projector, if necessary, to ensure a clear image.
For more detailed instructions and troubleshooting tips, please refer to the ViewSonic PJ766D Multimedia DLP Projector User Guide.
Add New Comment