Answer

Jan 28, 2025 - 11:39 PM
Installation and usage of the ZPE-HUB-UO1 7-Port USB Hub are straightforward. Here's a step-by-step guide:
1. Connect the USB Hub: Plug the USB Hub into any available USB 2.0 or USB 3.0 port on your Nodegrid Serial Consoles and Services Routers. It is recommended to avoid plugging the hub-on-hub as it may affect power and performance.
2. Power and Data Transfer: The USB Hub is designed to provide a data transfer speed of up to 5Gbps. It also features a built-in advanced chip to protect against over-current, over-voltage, short circuit, and high temperature.
3. Plug and Play: The USB Hub is plug-and-play, meaning it should be automatically recognized by your device without the need for additional drivers or software installation.
4. Cable Length: The USB Hub comes with an attached cable that is 1 meter (3.3 feet) long. This should provide ample length for connecting your devices.
5. Additional Sensors: The USB Hub allows you to connect up to seven additional Nodegrid sensors, expanding the capabilities of your Nodegrid appliances.
Please note that this USB Hub is assembled in the USA and is designed specifically for use with Nodegrid appliances. For further assistance or technical support, you can contact ZPESYSTEMS.COM at +1.844.4ZPESYS.
For more detailed information, you can refer to the ZPE-HUB-UO1 7-Port USB Hub Installation Guide provided with the product.
Add New Comment