User Manual Q&AAnswer
Jan 28, 2025 - 11:36 PM
To connect your Casio XJ-S30 Smart DLP Projector to a computer, please follow the steps below:
1. Ensure that both the projector and the computer are powered off.
2. Locate the VGA or HDMI port on the back of the projector.
3. Depending on the type of connection you want to use, prepare the appropriate cable (VGA or HDMI) to connect the projector to the computer.
4. Connect one end of the cable to the VGA or HDMI port on the back of the projector.
5. Connect the other end of the cable to the corresponding VGA or HDMI port on your computer.
6. Power on both the projector and the computer.
7. On the projector's remote control, press the Input button to select the correct input source (VGA or HDMI) that matches the connection you made.
8. The projector should now display the content from your computer.
For more detailed instructions and troubleshooting tips, please refer to the Casio XJ-S30 Smart DLP Projector User's Guide provided in the link you provided.
Add New Comment