User Manual Q&AAnswer
Jan 28, 2025 - 11:36 PM
To connect the ZPE-IO8-U01 8-Channel USB GPIO Module to your Node grid hardware, please follow these steps:
1. Locate an available USB 2.0 or USB 3.0 port on your Node grid Serial Consoles, Services Routers, or USB hubs connected to Node grid hardware.
2. Connect the module to the USB port using the provided USB cable. The USB cable should be detached and have a Thunderbolt connector on one end and a USB Type A connector on the other end. The cable length is 3 meters (10 feet).
3. Ensure that your Node grid's operating system meets the minimum version requirement for the sensor. If not, upgrade your Node grid OS to at least version 5.4.1.
For more detailed information and instructions, you can refer to the "Sensor Quick Install Guide" section available at: https://www.zpesystems.com/user-manua...
If you want to configure data collection in ZPE Data Lake, you can refer to Appendix C in the latest ZPE Cloud Manual, which can be found at: https://www.zpesystems.com/user-manua...
Please note that the rack cage used may be a different model or size, so make sure to consider the appropriate placement for the ZPE-IO8-U01 8-Channel USB GPIO Module based on your specific setup.
Add New Comment