User Manual Q&AAnswer
Jan 28, 2025 - 11:30 PM
You can connect your smartphone to the VILINICE JQ818 5G Wi-Fi Bluetooth Projector both wirelessly and through a cable. Here are the steps to establish the connection:
Wireless Connection:
1. Make sure both your smartphone and the projector are connected to the same Wi-Fi network.
2. On the projector, go to the Wi-Fi settings and find the network name and password.
3. On your smartphone, go to the Wi-Fi settings and select the same network.
4. Open the screen mirroring or casting feature on your smartphone (this may vary depending on your device).
5. Look for the projector's name in the available devices list and select it.
6. Your smartphone screen should now be mirrored on the projector.
Cable Connection:
1. Check if your smartphone supports video output via cable (e.g., HDMI or USB-C).
2. Purchase the appropriate cable (e.g., HDMI to HDMI or USB-C to HDMI) if you don't have one already.
3. Connect one end of the cable to your smartphone's video output port and the other end to the corresponding input port on the projector.
4. On the projector, select the input source that matches the cable connection (e.g., HDMI or USB).
5. Your smartphone screen should now be displayed on the projector.
Please refer to the user manual for specific instructions on connecting your smartphone, as the steps may vary slightly depending on the device and operating system you are using.
Add New Comment