User Manual Q&AAnswer
Jan 28, 2025 - 11:26 PM
To connect the ZPE Temperature and Humidity USB Sensor to your device, follow these steps:
1. Locate an available USB 2.0 or USB 3.0 port on your Node grid Serial Consoles, Services Routers, or USB hubs connected to Node grid hardware.
2. Connect the USB Mini B end of the included cable to the USB port on your device.
3. Connect the USB Type A end of the cable to the USB port on the ZPE Temperature and Humidity USB Sensor.
4. Ensure that your device meets the minimum Nodegrid OS version required by the sensor. If not, upgrade your Nodegrid OS to at least version 5.4.1.
5. For more detailed installation instructions, please refer to the "Sensor Quick Install Guide" section in the product's user manual, which can be found at: https://www.zpesystems.com/user-manua...
By following these steps, you will be able to successfully connect the ZPE Temperature and Humidity USB Sensor to your device and start acquiring environmental temperature and relative humidity readings.
Add New Comment