User Manual Q&AAnswer
Jan 28, 2025 - 11:06 PM
To install the DRIJA galaxy-90 Grease Extractor, follow these steps:
1. Draw a vertical line on the wall to center your hood (and your fat extractor) properly on your kitchen.
2. Make a mark on the vertical line 75 cm above the surface of your kitchen.
3. Use the supplied adjustment template to correctly position the extractor. Fix the hook on the wall and place the drill template on the hook.
4. Drill 3 holes of 8mm diameter in a suitable place in line with the hook of the extractor. Insert the screws into the holes.
5. Add the tube to the unidirectional valve and put it outdoors.
6. Install the grease extractors.
7. Drill 2 holes of 8mm diameter in a suitable place in line with the second plate and fix it. Place two screws (loosen but not place) directly on the plate.
8. Pull the internal fat extractor on the second plate and tighten the two screws.
Please refer to the user manual for detailed instructions and illustrations on the installation process.
Note: It is important to install the extractor at a minimum distance of 75 cm from the stove to ensure proper functioning and safety.
Add New Comment