User Manual Q&AAnswer
Jan 28, 2025 - 10:58 PM
To light the oven burner, follow these steps:
1. Press the oven xxxx "B" fully and turn it counterclockwise to the Max position, while keeping the oven door closed.
2. Hold the "B" xxxx for approximately 6 seconds to allow the gas to pass until the safety thermocouple is heated.
3. The burner should light up. If it doesn't light after 15 seconds, stop pressing the "B" xxxx , open the oven door, and wait at least one minute before trying again.
4. Once the burner is lit, the oven will automatically reach the set temperature and the thermostat will keep it constant.
Note: If the burner flame goes out accidentally, turn the control xxxx "B" to the off position, open the oven door, and wait at least one minute before trying again.
Add New Comment