User Manual Q&AAnswer
Jan 28, 2025 - 10:55 PM
To connect your device to the NEC NP-M403X HDMI Digital Light Processing Projector, follow these steps:
1. Make sure your device has an HDMI output port.
2. Locate the HDMI input port on the projector. It is labeled as "HDMI" and is usually located on the back or side panel.
3. Connect one end of an HDMI cable to the HDMI output port of your device.
4. Connect the other end of the HDMI cable to the HDMI input port of the projector.
5. Turn on your device and the projector.
6. Press the "Input" or "Source" button on the projector remote control to select the HDMI input source.
7. The projector should now display the content from your device.
Note: If your device does not have an HDMI output port, you may need to use an appropriate adapter or converter to connect it to the projector. Please refer to the user manual for your specific device for further instructions.
For more detailed information and troubleshooting tips, please refer to the user manual provided with the NEC NP-M403X HDMI Digital Light Processing Projector.
Add New Comment