User Manual Q&AAnswer
Jan 28, 2025 - 10:51 PM
To install the COLLINGWOOD K2 Industrial Floodlight, please follow these steps:
1. Tighten the bracket mounting hole layout on the mounting surface.
2. Fix the floodlight to the mounting surface using suitable fixings.
3. Connect the flying lead to the mains supply. It is important to use a suitable waterproof junction box or enclosure to maintain the IP65 rating of the product.
4. Tighten the two side bolts to clamp the floodlight in the required position.
Note: It is recommended to avoid installing the K2 Industrial floodlight in the same circuits as HID lamps.
Additional Installation Data:
- Before wiring, isolate the mains supply.
- This unit must be wired by a qualified electrician or a suitable competent person.
- The light source of this luminaire is not replaceable. When the light source reaches the end of its life, the entire luminaire should be replaced.
If you have any further questions or need assistance, please contact COLLINGWOOD Lighting at the following:
- Phone: +44 (0) 1604 495 151
- Email: sales@collingwoodgroup.com
- Website: collingwoodlighting.com
Please ensure proper disposal of this product. It should be separated from household waste and recycled responsibly. Contact your local government office for details on environmentally safe recycling options.
This product comes with a 5-year warranty and contains a light source of energy efficiency class F.
Add New Comment