User Manual Q&AAnswer
Jan 28, 2025 - 10:45 PM
To connect the DYN-MS-100 shaker to an external signal source, follow these steps:
1. Connect the DC power source to the shaker's power input.
2. Connect the drive signal from the external signal source to the shaker's signal input.
3. Start the external signal source.
4. Adjust the Gain of the amplifier by turning the Gain xxxx clockwise.
By following these steps, you will be able to connect the shaker to an external signal source and adjust the amplifier's gain for proper operation. For more detailed instructions, please refer to the "Operation and Installation" section of the instruction manual.
Add New Comment