User Manual Q&AAnswer
Jan 28, 2025 - 10:36 PM
To install the Lenovo ThinkAgile VX 2U Certified Node (Xeon SP Gen 2), please follow the steps outlined in the user guide provided by Lenovo. The user guide provides detailed instructions and illustrations to help you with the installation process.
Here is a brief overview of the installation process:
1. Before starting the installation, ensure that you have read and understood all the safety precautions mentioned in the user guide.
2. Prepare the necessary tools and equipment required for the installation, such as a screwdriver and cable management accessories.
3. Position the server rack or cabinet in a suitable location with proper ventilation and power supply.
4. Unpack the Lenovo ThinkAgile VX 2U Certified Node and verify that all the components are included and in good condition.
5. Carefully slide the server into the rack or cabinet, aligning the mounting rails with the corresponding slots.
6. Secure the server in place by tightening the screws on the mounting rails.
7. Connect the necessary cables, such as power cables, network cables, and storage cables, according to the provided guidelines.
8. Once all the connections are made, power on the server and follow the instructions in the user guide to configure the system.
For more detailed instructions and illustrations, please refer to the Lenovo ThinkAgile VX 2U Certified Node (Xeon SP Gen 2) User Guide. It provides step-by-step guidance on the installation process, including safety precautions, hardware setup, and initial configuration.
You can access the user guide online at the following link: [Link to the user guide](https://lenovopress.com/lp1500-thinka...)
If you encounter any issues or have further questions during the installation process, it is recommended to consult the user guide or reach out to Lenovo support for assistance.
Add New Comment