User Manual Q&AAnswer
Jan 28, 2025 - 10:29 PM
To connect your Bluetooth enabled device to the RYOBI PAD02 Compact Speaker, follow these steps:
1. Install a fully charged battery pack into the speaker and turn it on. The speaker will say "Power On" and attempt to connect to the last device it was paired with.
2. On your Bluetooth enabled device, go to the Bluetooth settings and set it to search or scan for available Bluetooth signals.
3. From the list of available devices, select "RYOBI PAD02" to pair with the speaker. No password or PIN is required for connection.
4. Once the device is successfully paired with the speaker, the speaker will say "Bluetooth Connected" and the LED light will turn solid.
Note: For the best connection, make sure your Bluetooth enabled device is within 50 feet of the speaker and set to search or scan for Bluetooth devices.
If the speaker does not pair with your device, turn off the power to the speaker, wait for 5 seconds, and then turn it back on. Repeat the pairing process.
To disconnect the Bluetooth enabled device, press and hold the PLAY/PAUSE button on the speaker for three seconds. The speaker will say "Bluetooth Disconnected" and the LED light will flash. The speaker will then search for another Bluetooth signal.
Please refer to the instruction manual for more detailed information and troubleshooting tips.
Add New Comment