Answer

Jan 28, 2025 - 10:21 PM
To pair the ELECOM M-CC2BRS CAPCLIP IR Bluetooth Mouse with your computer, follow these steps:
For Windows® (Windows® 10):
1. Click the "Action Center" in the lower-right part of the screen, and then click "Windows Settings."
2. Tap "Devices", and then select "Bluetooth and other devices settings."
3. Click [+] of "Add Bluetooth or other device."
4. Open the connector cover on the mouse, and then use an item with a pointed tip to hold down the pairing button for 2 to 3 seconds. The mouse will switch to pairing mode, and the LED light will blink in red.
5. Click "Bluetooth" in the "Add Device" section, and then click "ELECOM IR Optical Mouse." The pairing is started. The pairing is completed when the LED light is turned off.
6. You can use the mouse when "ELECOM IR Optical Mouse" is added to the "Bluetooth and other devices settings" display.
For Macintosh (macOS Sierra(10.12)):
1. Open "System Preferences" from the Apple menu. Click "Mouse", then select "Bluetooth mouse settings."
2. Open the connector cover on the mouse, and then use an item with a pointed tip to hold down the pairing button for 2 to 3 seconds. The mouse will switch to pairing mode, and the LED light will blink in red.
3. Select "ELECOM IR Optical Mouse", then click "Pairing." The pairing is completed when the LED light is turned off.
4. "Connected" will be shown on your display, and then the status of "ELECOM IR Optical Mouse" will be changed to "Connected." Click "Finish" to start using the mouse.
Please note that the pairing method may vary depending on the PC you are using. For more details, refer to your PC's instruction manual.
Add New Comment