User Manual Q&AAnswer
Jan 28, 2025 - 10:13 PM
To install the Litedeer Homes 68 In Latitude II Built In Smart Linear Electric Fireplace, follow these steps:
1. Make sure the main power switch is turned off.
2. Plug the power plug into a wall socket.
3. Place the fireplace into the wall framing and use framing screws to secure the side brackets to the wall.
4. Use the provided screws to fix the fireplace to the wooden frame.
5. Loosen and remove the two screws that lock the outer frame, then take out the front trim piece.
6. Loosen and remove the hinge plate behind the top trim, remove the screws of the baffle bar on the inclined glass, and remove the inclined glass.
7. Place natural pebbles on the bottom and then put the driftwood log sets on the ember bed.
8. Put the glass back in place, lock the hinge plate, and fix the outer metal frame.
9. Reinstallation is the opposite of the disassembly steps above.
For more detailed instructions and diagrams, please refer to the user guide provided with the product.
Add New Comment