Answer
Jan 28, 2025 - 09:58 PM
To mount the AIRAM IP44 27W/940 3500LM PSMP DA2 Plano Pro luminaire, please follow the instructions provided below:
1. Ensure that the luminaire is not covered with thermally insulated material, as it is not suitable for such applications.
2. Before starting the installation, make sure to switch off the current to avoid any electrical hazards.
3. This product requires the expertise of a professional electrician for installation. It is important to use only the rated voltage and frequency as marked on the fixture/driver.
4. The luminaire features a push-button control for on/off, dimming, and color temperature adjustment (TW). The control operates at 230 V.
5. The luminaire contains a non-replaceable light source with an energy efficiency class of D. When the light source reaches its end of life, the entire luminaire should be replaced.
6. It is recommended to keep this mounting instruction available during installation and for future maintenance.
If you have any further questions or need additional assistance, please refer to the manual provided with the product or contact Airam Electric Oy Ab at the following address: Sementtitehtaankatu 6, FI-04260 Kerava, Finland. You can also visit their website at www.airam.fi for more information.
Add New Comment