User Manual Q&AAnswer
Jan 28, 2025 - 09:56 PM
The installation process for the VISION VFM-W2X2TV2 Wall Mount is relatively straightforward. Here is a step-by-step guide to help you with the installation:
1. Start by identifying the appropriate location on the wall where you want to mount your TV. Ensure that the wall is sturdy enough to support the weight of the TV and the wall mount.
2. Use a stud finder to locate the studs in the wall. It is recommended to mount the wall bracket directly onto the studs for maximum stability. Mark the locations of the studs using a pencil.
3. Hold the wall bracket against the wall, aligning it with the marked stud locations. Use a level to ensure that the bracket is straight. Mark the xxxx hole locations on the wall using a pencil.
4. Pre-drill pilot holes at the marked xxxx hole locations using an appropriate drill bit. Make sure the pilot holes are slightly smaller than the diameter of the screws provided with the wall mount.
5. Attach the wall bracket to the wall using the provided screws and a screwdriver or drill. Ensure that the bracket is securely fastened to the wall.
6. Next, attach the TV brackets to the back of your TV. Refer to the TV's user manual for instructions on how to do this. Make sure the TV brackets are securely attached to the TV.
7. Lift the TV and carefully hook the TV brackets onto the wall bracket. Ensure that the TV is level and centered on the wall bracket.
8. Once the TV is properly positioned on the wall bracket, secure it in place using the provided safety screws or locking mechanism. This will prevent the TV from accidentally being lifted off the wall bracket.
9. Double-check that all screws and connections are tightened securely.
Please note that this is a general guide, and it is important to refer to the specific instructions provided in the VISION VFM-W2X2TV2 Wall Mount Installation Guide for detailed information and any additional steps or precautions specific to this particular wall mount model.
Add New Comment