User Manual Q&AAnswer
Jan 28, 2025 - 09:34 PM
To install the hygger HG-020 Wave Maker on your aquarium, please follow the steps below:
1. Unpack the box and check if all the necessary parts are included. If any parts are missing, please contact the seller.
2. Insert the fixture of the magnetic base into the pump.
3. Separate the magnetic base and remove the silicon mats. These mats prevent your hands from being pinched. If your fish tank glass is thin, you can keep the cushion on the base to reduce vibration and noise.
4. Adjust the desired angle of the wave maker and install it at a position 6-8 inches below the water level. Place the magnetic and suction base mount outside the tank.
5. Power on the wave maker.
For more detailed instructions and illustrations, please refer to the "INSTALLATION" section of the hygger HG-020 Wave Maker User Manual.
Add New Comment