User Manual Q&AAnswer
Jan 28, 2025 - 09:32 PM
To assemble and use the hygger HG036 Aquarium Gravel Cleaner, please follow these steps:
1. Connect the water inlet and outlet before using.
2. Put the extension tube into the aquarium and the water outlet into a bucket.
3. Push the siphon switch several times until the water fills the whole outlet strap tube. Release the siphon switch, and water will flow out automatically.
4. The outlet works normally, allowing the sand to move up and down in the extension tube to remove debris from your aquarium.
5. The gravel cleaner is equipped with a flow control valve and a hose fixture clamp. Adjust the water flow as needed.
6. The outlet strap hose can be hung on the bucket, and the water flow can be adjusted freely.
7. The aquarium gravel cleaner is manual in operation, so the only noise you will hear is that of water.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment