User Manual Q&AAnswer
Jan 28, 2025 - 09:02 PM
To switch between different HDMI inputs using the Ocean Matrix OMX-07HMHM0003 HDMI 3x1 Switcher, you can follow these steps:
1. Make sure all your HDMI devices are properly connected to the switcher's input ports (HDMI 1, HDMI 2, HDMI 3).
2. Connect the HDMI output port of the switcher to your display or projector.
3. Power on the switcher and your connected devices.
4. By default, the switcher is set to automatic switching mode. This means that it will automatically detect and switch to the active HDMI input.
- The Auto Mode LED indicator on the switcher will be lit when in automatic switching mode.
- The Input Ports 1-3 LED indicators will show a blue LED when an active signal is detected on the corresponding input, and no LED when there is no input signal.
5. If you want to manually switch between HDMI inputs, press the Select Switch on the switcher.
- Each press of the Select Switch will cycle through the available HDMI inputs.
- The Auto Mode LED indicator will turn off, indicating that the switcher is now in manual switching mode.
6. You can also use the included remote control to switch between HDMI inputs.
- Press the number corresponding to the input source you want to select.
- The remote control also has a Power Button to turn on/off the IR receiver function.
7. Ensure that your display or projector is set to the correct input source to see the video output from the selected HDMI input.
Please refer to the owner's manual for more detailed instructions and troubleshooting information.
Add New Comment