User Manual Q&AAnswer
Jan 28, 2025 - 08:56 PM
To save a kit on the ALESIS Crimson II SE Mesh Kit Bundle, follow these steps:
1. Press the "Kit" button on the top panel to enter the Kit Selection page.
2. Use the dial or the Left and Right buttons to select the kit you want to save. You can switch between preset kits (001-054) and user kits (055-074) by pressing the "Kit" button.
3. Press the "Save" button. The display will show "Rename Kit" at the top.
4. On this page, you can use the dial to change the currently selected character and the Left or Right buttons to move to the next or previous character.
5. After entering the name of the new kit, press the "Down" button to select "Save" to continue saving the kit or "Cancel" to cancel and return to the Kit Selection page.
6. The desired user kit and "Save?" will appear in the display.
7. Use the dial or the Left and Right buttons to select a user kit.
8. Press the "Enter" button to confirm your choice. "Save OK!" will briefly appear in the display.
It is recommended to save your changes after editing a kit or voice to ensure that your settings are preserved.
Add New Comment