User Manual Q&AAnswer
Jan 28, 2025 - 08:50 PM
To perform a zeroing operation on the ATEC ADT282 Dual-Channel Reference Thermometer Readout, follow these steps:
1. Connect the mV or resistance signal to the corresponding channel on the device.
2. Click the menu icon of the measurement channel that you want to zero.
3. In the pop-up menu, select the zeroing icon (if available) for the channel.
4. The device will perform the zeroing operation, eliminating any zero-point drift in the signal.
Note: The zeroing operation is only available for mV and resistance signals. The allowable zeroing range is 1% FS (full scale).
Add New Comment