User Manual Q&AAnswer
Jan 28, 2025 - 08:47 PM
To connect the AXXESS XSVI-9006-NAV Interface Harness to your aftermarket radio, follow these steps:
1. Connect the Black wire from the XSVI-9006-NAV harness to the ground wire of your aftermarket radio.
2. Connect the Yellow wire from the XSVI-9006-NAV harness to the battery wire of your aftermarket radio.
3. Connect the Red wire from the XSVI-9006-NAV harness to the accessory wire of your aftermarket radio.
4. If your aftermarket radio has an illumination wire, connect the Orange wire from the XSVI-9006-NAV harness to it.
5. Tape off and disregard the Blue/White wire from the XSVI-9006-NAV harness, as it will not be used in this application.
6. Connect the Gray wire from the XSVI-9006-NAV harness to the right front positive speaker output of your aftermarket radio.
7. Connect the Gray/Black wire from the XSVI-9006-NAV harness to the right front negative speaker output of your aftermarket radio.
8. Connect the White wire from the XSVI-9006-NAV harness to the left front positive speaker output of your aftermarket radio.
9. Connect the White/Black wire from the XSVI-9006-NAV harness to the left front negative speaker output of your aftermarket radio.
10. Connect the Green wire from the XSVI-9006-NAV harness to the left rear positive speaker output of your aftermarket radio.
11. Connect the Green/Black wire from the XSVI-9006-NAV harness to the left rear negative speaker output of your aftermarket radio.
12. Connect the Purple wire from the XSVI-9006-NAV harness to the right rear positive speaker output of your aftermarket radio.
13. Connect the Purple/Black wire from the XSVI-9006-NAV harness to the right rear negative speaker output of your aftermarket radio.
Note: If your aftermarket multimedia/navigation radio requires additional wires, such as parking brake, speed sense, or reverse, connect the corresponding wires from the XSVI-9006-NAV harness to those wires on your aftermarket radio.
If you are retaining the factory backup camera, connect the Yellow RCA jack from the XSVI-9006-NAV harness to the backup camera input on your aftermarket radio.
Please refer to the AXXESS XSVI-9006-NAV Interface Harness Installation Guide for more detailed instructions and illustrations.
Add New Comment