User Manual Q&AAnswer
Jan 28, 2025 - 08:45 PM
To install the AXIS 5503-741 3.5mm Cabinet Gasket A, 10-Pack, please follow the steps below:
1. Ensure that the surface where you will be installing the gasket is clean and free from any debris or dust.
2. Take one gasket from the pack and peel off the backing paper to expose the adhesive side.
3. Carefully align the gasket with the desired location on the cabinet or surface where you want to create a seal. Make sure to position it accurately to achieve the best seal.
4. Press the gasket firmly onto the surface, starting from one end and moving towards the other. Apply even pressure to ensure proper adhesion.
5. Repeat the process for the remaining gaskets in the pack, placing them at suitable intervals along the cabinet or surface as needed.
6. Once all the gaskets are installed, double-check their alignment and adhesion to ensure a secure seal.
Note: It is important to follow the manufacturer's instructions and guidelines for the specific application of the gasket. If you have any doubts or questions, refer to the product manual or contact the manufacturer's customer support for further assistance.
Add New Comment