User Manual Q&AAnswer
Jan 28, 2025 - 08:30 PM
To adjust the flow rate of the hygger HG-915 Series Aquarium DC Water Pump, you can use the included controller. The controller has touch-control panels and an LED display. Here are the steps to adjust the flow rate:
1. Connect the pump to the controller and the 24V adapter correctly before working.
2. The control is set to perform the last operation mode by default. The LED display will show "PXXX" where "P" is short for power and "XXX" is the rate of work.
3. Touch the button on the controller to show the instant working mode on the LED display.
4. You can set different power levels by touching the button. There are 71 settings for the working mode, allowing you to adjust the flow rate to suit your needs.
5. The LED display will show the working mode as "FXXX" when you press the button. The range of "FXXX" is from 30 to 100. You can press and hold the button for several seconds to continuously change the working mode between F030 and F100.
6. If you don't press any button for more than 25 seconds, the LED display will dim to micro bright and the controller will enter the screen saver mode. Press any button to return the LED display to normal.
By following these steps, you can easily adjust the flow rate of the hygger HG-915 Series Aquarium DC Water Pump using the included controller.
Add New Comment