User Manual Q&AAnswer
Jan 28, 2025 - 08:10 PM
To initialize the Dahua IPC-HDBW2531E Vandal Proof Dome Network Camera, you can follow the steps below:
1. Search for the device using the ConfigTool software. Double-click on ConfigTool.exe to open the tool.
2. Click on "Modify IP" and select the appropriate searching method.
3. Select the uninitialized camera(s) and click on "Initialize."
4. Confirm the devices you want to initialize and click on "Initialize" again.
5. If you have provided an email address for password reset, you can reset the password through an XML file. Otherwise, you can only reset the password through the XML file.
6. Select "Auto-check for updates as needed" and click "OK" to initialize the device. If the initialization fails, you can click to see more information.
7. Click "Finish" to complete the initialization process.
Please note that the username for logging in to the device is "admin," and the password is the one you set during the initialization process.
For more detailed instructions and information, you can refer to the Dahua IPC-HDBW2531E Vandal Proof Dome Network Camera User Guide provided with the product.
Add New Comment