User Manual Q&AAnswer
Jan 28, 2025 - 10:36 AM
To connect the GHome Smart SW6 2 Wi-Fi Switch to your Wi-Fi network, follow these steps:
1. Login to your account and add your device.
2. Choose the 2.4GHz Wi-Fi network (not 5G) during the setup process.
3. Connect your device to the Wi-Fi network.
4. If needed, reset the device by pressing any ON/OFF button for 5 seconds.
5. Launch the app and register an account.
6. Tap on the "+" icon in the top right corner to add the device.
7. Select "our switch" from the list.
8. Follow the instructions in the app to set up your Wi-Fi connection.
9. If the LED indicator on the switch flashes quickly, the reset was successful and it is ready to connect.
10. If the LED indicator is flashing quickly, press either of the ON/OFF buttons for 5 seconds to stop the blinking. Then select the "SmartLife-XXX" hotspot in the app to connect to it. Wait for the connection to establish.
For more detailed instructions, please refer to the user manual provided with the GHome Smart SW6 2 Wi-Fi Switch.
Add New Comment