User Manual Q&AAnswer
Jan 28, 2025 - 10:35 AM
To connect the LEDEPLY GU10 Smart Spot Light Bulb to your Wi-Fi network, please follow these steps:
1. Make sure that your Wi-Fi network is operating on the 2.4GHz frequency. The smart bulb only supports 2.4GHz Wi-Fi networks and is not compatible with 5GHz networks.
2. Open the "Smart Life" app on your smartphone or tablet.
3. Tap on "Add device" and select "Lighting" from the list of device types.
4. Choose "Light source (BLE + Wi-Fi)" to connect your smart bulb.
5. Follow the on-screen instructions to put your smart bulb into pairing mode. This may involve turning the bulb on and off multiple times until it starts flashing.
6. Once the bulb is in pairing mode, the app will detect it and prompt you to connect it to your Wi-Fi network. Make sure to select your 2.4GHz Wi-Fi network from the list and enter your Wi-Fi password when prompted.
7. Wait for the app to complete the setup process. Once the bulb is successfully connected to your Wi-Fi network, you will be able to control it remotely using the app.
If you are still experiencing issues connecting the smart bulb to your Wi-Fi network, make sure that your Wi-Fi signal is strong and try moving the bulb closer to your router during the setup process. Additionally, double-check that your Wi-Fi network is set to 2.4GHz and not 5GHz.
For more detailed instructions and troubleshooting tips, please refer to the LEDEPLY GU10 Smart Spot Light Bulb User Manual.
Add New Comment