User Manual Q&AAnswer
Jan 28, 2025 - 10:19 AM
To connect the Avatar Controls E26 Smart LED Light Bulb to Wi-Fi, please follow these steps:
1. Make sure you have a 2.4 GHz Wi-Fi network available. If your router has both 2.4 GHz and 5 GHz bands, ensure that your phone and the smart bulb are connected to the 2.4 GHz signal.
2. Open the AvatarControls app and log in to your account.
3. Tap the "+" button to add a device.
4. On the "Add Device" page, make sure the Smart Bulb is in EZ mode, which is indicated by fast flashing (about two times a second). If it's not in EZ mode, you can switch to it by performing a continuous on-off-on-off-on operation on the bulb.
5. Once the Smart Bulb is in EZ mode, tap on "Indicator light is flashing fast" in the app to start adding the bulb.
6. Select your Wi-Fi network from the list and enter the password. Then, start the configuration of the device.
7. After a successful configuration, the app will display "Device added successfully."
Your Avatar Controls E26 Smart LED Light Bulb is now connected to your Wi-Fi network and can be controlled using the app.
Note: If you encounter any issues during the connection process, please refer to the troubleshooting section in the user manual or contact Avatar Controls customer support for further assistance.
Add New Comment