User Manual Q&AAnswer
Jan 28, 2025 - 08:40 AM
To connect your iOS or Android device to the Atombud Home Theater Mini Projector for wireless mirroring, please follow these steps:
1. Make sure your projector is connected to your home Wi-Fi network. You can do this by going to the projector's homepage and selecting "Setup" and then "Network". Follow the on-screen instructions to connect to your Wi-Fi network.
2. For iOS devices:
- On the projector's homepage, click on "iOS Cast".
- On your iOS device, go to the Control Center by swiping down from the top right corner (or bottom for older models) of the screen.
- Tap on the "Screen Mirroring" or "AirPlay" option.
- Your iOS device will search for available devices. Look for the network name starting with "WJ-XXXX" and select it.
- Once connected, your iOS device's screen will be mirrored on the projector.
3. For Android devices:
- On the projector's homepage, click on the "Android Cast" link.
- On your Android device, go to the Settings menu and select "Connected devices" or "Cast".
- Turn on wireless projection or screen mirroring.
- Your Android device will search for available devices. Look for the network name starting with "WJ-XXXX" and select it.
- Once connected, your Android device's screen will be mirrored on the projector.
Please note that the Wi-Fi function of the projector may not support certain protected smartphone apps due to copyright restrictions. In such cases, it is recommended to use an HDMI connection when streaming apps like Netflix, Hulu, etc.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Atombud Home Theater Mini Projector.
Add New Comment