User Manual Q&AAnswer
Jan 28, 2025 - 08:20 AM
To change the ISO settings on the Fujifilm X10 digital camera, follow these steps:
1. Turn on the camera and set it to shooting mode.
2. Press the "MENU/OK" button located at the center of the control dial on the back of the camera.
3. Use the control dial to navigate to the "ISO" option in the menu.
4. Press the "MENU/OK" button again to enter the ISO settings.
5. Use the control dial to select the desired ISO value.
6. Press the "MENU/OK" button to confirm the selection and exit the menu.
The ISO settings range from ISO 100 to ISO 12800 on the Fujifilm X10. Higher ISO values are useful in low-light situations but may introduce more noise to the image. Lower ISO values produce cleaner images but require more light. Experiment with different ISO settings to find the balance between image quality and lighting conditions for your specific needs.
For more detailed instructions and information on ISO settings, refer to the Fujifilm X10 user manual, specifically the "Shooting Mode" section, which can be found on page 43 of the manual.
Add New Comment