User Manual Q&AAnswer
Jan 28, 2025 - 06:02 AM
To connect your Sanyo PLC-WL2503 Multimedia Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the computer input port on the back of the projector. It is labeled "Computer 1 IN" or "Computer 2 IN" depending on the model.
3. Use an appropriate cable to connect the computer output port (VGA or HDMI) to the corresponding computer input port on the projector. If your computer has a VGA output, use a VGA cable. If it has an HDMI output, use an HDMI cable.
4. Once the cable is securely connected, turn on your computer and then turn on the projector.
5. On your computer, go to the display settings and select the appropriate display mode for the projector. This may involve extending or duplicating your desktop.
6. Adjust the focus and zoom settings on the projector as needed to ensure a clear image.
For more detailed instructions and troubleshooting tips, please refer to the owner's manual of the Sanyo PLC-WL2503 Multimedia Projector. You can access the manual using the link provided at the beginning of this conversation.
Add New Comment