User Manual Q&AAnswer
Jan 28, 2025 - 05:23 AM
To connect the Cree Lighting BA19 08027OMF 12CE26 1C100 LED Smart Bulb to your Amazon Echo, you will need a compatible hub such as the Wink Hub or SmartThings Hub. Here are the steps to connect the bulb:
1. Install the Wink Hub or SmartThings Hub according to the provided instructions.
2. Open the respective app (Wink App or SmartThings Mobile App) on your mobile device.
3. Add the Wink Hub or SmartThings Hub to the app by following the on-screen instructions.
4. Install the Cree Lighting BA19 08027OMF 12CE26 1C100 LED Smart Bulb in a lamp or light fixture. Make sure the switch to the lamp or fixture is turned off.
5. In the app, select the option to add a new device or product.
6. Choose the option for adding lights or light bulbs.
7. Select the Cree Lighting BA19 08027OMF 12CE26 1C100 LED Smart Bulb from the list of supported devices.
8. Follow the on-screen instructions to pair the bulb with the hub. This may involve turning on the bulb at the wall or lamp switch.
9. Once the bulb is successfully connected, you can control it using the respective app or through voice commands with your Amazon Echo.
Please note that the specific steps may vary slightly depending on the hub and app you are using. Refer to the manual for your hub and app for detailed instructions.
Add New Comment